Green River’s hardwood flooring can be installed with the following approved methods: stapled/nailed to a wood subfloor, or glued directly to concrete. Green River strongly recommends that the flooring be installed by a professional wood flooring installer or an accredited National Wood Flooring Association (NWFA) trained installer.

General Pre-installation Notes:

Installation of your Green River floor should be installed after the sheetrock, tile and all brick work has thoroughly dried and all but the final woodwork and trim have been completed.

The building interior should be dry and seasoned with a comfortable working temperature of at least 60°F during installation. Inspect all flooring prior to installation.

Green River’s warranties do not cover flooring with visible defects once they are installed. It is the responsibility of the installer/supervisor/owner to insure that subfloor and jobsite conditions are environmentally and structurally acceptable for installation of Green River’s hardwood flooring.

Problems or failures related to deficiencies in subfloor or job site damage after installation will not be covered by wood flooring warranty.